Differences

This shows you the differences between two versions of the page.

--- ospar_sampling_guidelines [2025/12/03 22:17] – [Spatial Representation Required to Comply Correctly with OSPAR Guidelines] nefcadmin
+++ ospar_sampling_guidelines [2026/01/07 21:05] (current) – [Interactive Calculator] nefcadmin
@@ Line 62: / Line 62: @@
 "1.2 PD Teesport Limited undertakes maintenance dredging of the Tees Estuary and Hartlepool Channel to maintain navigable depths as part of their statutory harbour authority responsibilities. Under marine licence L/2015/00427, this dredged material is disposed of at Tees Bay A (TY160) offshore disposal site. Marine licence L/2015/00427 is valid until 30th December 2025 and permits the annual disposal of 2,438,420 wet tonnes (1,875,700m3) of material from the Tees and 451,280 wet tonnes (347,400m3) from Hartlepool."
-The MMO and Cefas considered that 31 samples were sufficient for the annual disposal of the stated 2,223,100m<sup>3</sup> per year, based on based on the volume table from OSPAR Agreement 2014-06 paragraph 5.3.
+The MMO and Cefas considered that 31 samples were sufficient for the annual disposal of the stated 2,223,100m<sup>3</sup> per year, based on the volume table from OSPAR Agreement 2014-06 paragraph 5.3.
 "1.1 This advice relates to sampling to support mid-licence condition compliance for the disposal of material from the Tees Estuary and Hartlepool Channel. It is understood that this advice will also be used to support the submission of a marine licence application in 2025 to continue disposal activities."
@@ Line 78: / Line 78: @@
 ==== Spatial Representation Required to Comply Correctly with OSPAR Guidelines ====
-There are 2 distinct areas which PD Ports as the statutory harbour authority are responsible for.  The River Tees where the defined area is 1612.66 hectares and the Port of Hartlepool where the defined area is 55.92 hectares, giving a total area for which the maintenance dredging licence applies to of 1668.58 hectares.
+There are 2 distinct areas which PD Ports as the statutory harbour authority are responsible for the River Tees and the Port of Hartlepool.
-Using the area of 16685800m<sup>2</sup> it is possible to use the area table of paragraph 5.3 to determine the number of samples necessary to fulfil the area requirement of the OSPAR Guidelines.
+{{ :251217mla_2015_00088-all10yearsamples.png?400 |All sampling locations during 10 year duration of MLA/2015/00088}}
+=== MLA/2015/00088 ===
+In this marine licence application, the River Tees had a defined area of 1612.66 hectares and the Port of Hartlepool had a defined area of 55.92 hectares, giving a total area for which the maintenance dredging licence applies to of 1668.58 hectares.
+From the [[this>RiverTees/Planning/MLA_2015_00088/Response%20Documents/Marine Coordinates Schedules.pdf|Marine Coordinate Schedules]] ([[this>RiverTees/Planning/MLA_2018_00088/Response%20Documents/MLA_2015_00088.kml|kml]]), which give an area of 16685800m<sup>2</sup> it is possible to use the area table of paragraph 5.3 to determine the number of samples necessary to fulfil the area requirement of the OSPAR Guidelines.
 |**Area m<sup>2</sup>**|**Samples Required**|
@@ Line 87: / Line 94: @@
 |**16685800**|**839**|
-These figures are based on the map supplied by PD Ports to define the area they want to dredge in, which defines the whole river and port areas, as such 839 stations would be required.
+These figures are based on the map supplied by PD Ports to define the area they want to dredge in, which defines the whole river and port areas, as such 839 stations would have been required.  In the whole 10 years of the L/2015/00427 less than 150 samples were taken at the locations shown in the figure above.
+{{ :251217mla_2025_00263-applicationsamples.png?400 |31 Samples from MLA/2015/00088 mid-licence sampling accepted as application samples}}
+=== MLA/2025/00263 ===
+In this marine licence application, the River Tees had a defined area of 1162.37 hectares and the Port of Hartlepool had a defined area of 54.77 hectares, giving a total area for which the maintenance dredging licence applies to of 1217.14 hectares.
+From the [[this>RiverTees/Planning/MLA_2025_00263/Response%20Documents/Marine Coordinate Schedules.pdf|Marine Coordinate Schedules]] ([[this>RiverTees/Planning/MLA_2025_00263/Response%20Documents/MLA_2025_00263.kml|kml]]), which give an area of 12171400m<sup>2</sup> it is possible to use the area table of paragraph 5.3 to determine the number of samples necessary to fulfil the area requirement of the OSPAR Guidelines.
+|**Area m<sup>2</sup>**|**Samples Required**|
+|**<100,000**|10|
+|**Subsequent 100,000**|5|
+|**12171400**|**614**|
+These figures are based on the map supplied by PD Ports to define the area they want to dredge in, which defines the whole river and port areas, as such 614 stations would be required.  Less than 150 samples were taken in during the 10 years of the previous licence L/2015/00427 for the licensed area of 1,669hectares and the last mid-licence samples were consider appropriate to represent the state of the whole 1,217hectares for which a new licence was requested.
 It is obvious that in order for the L/2025/00366 to be in compliance with the OSPAR Convention that considerably more samples need to be obtained to "represent the horizontal and vertical extent of the area" with a subsequent check that "the quantity of material to be dredged" is also properly represented." (OSPAR Agreement 2014-06 paragraph 5.2).
+===== Interactive Calculator =====
+OSPAR 2014-06 paragraph 5.3: "Where projected depth of dredging is significant, samples will be required at depth, usually by vibracore. The volume of the dredge material should be taken into consideration to determine the number of samples, as below."
+This is well reflected in the number of samples calculated based on these tables, where dredging more than 5m depths shows that the volume table recommends a greater number of samples than the area station numbers.
+{{url>https://northeastfc.uk/Tools/OSPAR-NumberStationSampleCalculator.html 100%,5000}}